CP Plus CP-UNC-VC41L5C-VMDS-V2 Quick Start Manual page 3

•
Please visit our website, contact the supplier or customer service if there is any problem occurred when using
the device.
•
If there is any uncertainty or controversy, please refer to our final explanation.
Important Safeguards and Warnings
This section introduces content covering the proper handling of the device, hazard prevention, and prevention
of property damage. Read carefully before using the device and comply with the guidelines when using it.
Transportation Requirements
● Transport the device under allowed humidity and temperature conditions.
● Pack the device with packaging provided by its manufacturer or packaging of the same quality before
transporting it.
● Do not place heavy stress on the device, violently vibrate or immerse it in liquid during transportation.
Storage Requirements
● Store the device under allowed humidity and temperature conditions.
● Do not place the device in a humid, dusty, extremely hot or cold site that has strong electromagnetic radiation
or unstable illumination.
● Do not place heavy stress on the device, violently vibrate or immerse it in liquid during storage.
Installation Requirements
● Strictly comply with the local electrical safety code and standards, and check whether the power supply is
correct before operating the device.
● Please follow the electrical requirements to power the device.
● When selecting the power adapter, the power supply must conform to the requirements of ES1 in IEC 62368-1
standard and be no higher than PS2. Please note that the power supply requirements are subject to the device
label.
● We recommend using the power adapter provided with the device.
● Do not connect the device to two or more kinds of power supplies, unless otherwise specified, to avoid damage
to the device.
● The device must be installed in a location that only professionals can access, to avoid the risk of
nonprofessional's becoming injured from accessing the area while the device is working. Professionals must
have full knowledge of the safeguards and warnings of using the device.
● Do not place heavy stress on the device, violently vibrate or immerse it in liquid during installation.
● An emergency disconnect device must be installed during installation and wiring at a readily accessible location
for emergency power cut-off.
● We recommend you use the device with a lightning protection device for stronger protection against lightning.
For outdoor scenarios, strictly comply with the lightning protection regulations.
● Ground the function earthing portion
with earthing holes). The device is a class I electrical appliance. Make sure that the power supply of the device is
connected to a power socket with protective earthing.
of the device to improve its reliability (certain models are not equipped