Viewing Storage Array Connections; Adding/Editing A Comment To An Existing Storage Array - Dell POWERVAULT MD3620I Owner's Manual

Viewing Storage Array Connections

You can use the View Connections option to view the expansion enclosures
connected to the RAID controller module.
To view the storage array connections:
1 From the toolbar in AMW, select Storage Array View Connections.
The <Storage Array>:Connections dialog is displayed.
2 Click the column name to sort the connections according to your
preference.
3 Click Close.
If you receive an error message for a port, you can use this dialog to identify
the components on the port that may have caused the error. By isolating these
components, you prevent accidentally disconnecting components that are
still in operation, which could cause an interruption in data flow.

Adding/Editing a Comment to an Existing Storage Array

A descriptive comment, with an applicable storage array name, is a helpful
identification tool. You can add or edit a comment for a storage array in the
EMW only.
To add or edit a comment:
1 In the EMW, select the Devices tab and select the relevant managed
storage array.
2 Select Edit Comment.
The Edit Comment dialog is displayed.
3 Type a 60-character comment.
4 Click OK.
This option updates the comment in the table view and saves it in your local
storage management station file system. The comment is not displayed to
administrators who are using other storage management stations.
Configuration: About Your Storage Array
75