Dell POWERVAULT MD3620I Owner's Manual page 81

• Validating an e-mail address—Type the e-mail address in Email
address or select the e-mail address in the Configured email addresses
area, and click Test. A test e-mail is sent to the selected e-mail address.
A dialog with the results of the test and any error is displayed.
8 For the selected e-mail address, in Information To Send, select:
• Event Only—The e-mail alert contains only the event information.
This alert type is the default.
• Event + Profile—The e-mail alert contains the event information and
the storage array profile.
• Event + Support—The e-mail alert contains the event information
and a compressed file that contains complete support information for
the storage array that has generated the alert.
9 For the selected e-mail address, in Frequency, select:
• Every event—Sends an e-mail alert whenever an event occurs. This is
the default option.
• Every x hours—Sends an e-mail alert after the specified time interval
if an event has occurred during that time interval. You can select this
option only if you have selected either Event + Profile or Event +
Support in the Information To Send drop down list.
10 Click OK.
An alert icon is displayed next to each node in the Tree view where an alert
is set.
To ensure that the e-mail is sent successfully:
• Provide an SMTP mail server name and an e-mail sender address for the e-
mail addresses to work.
• Ensure that the e-mail addresses that you had previously configured are
displayed in the Configured e-mail addresses area.
• Use fully qualified e-mail addresses; for example, name@mycompany.com.
Configure multiple e-mail addresses before you click OK.
•
Configuration: About Your Storage Array
81