Moving A Host To A Different Host Group - Dell POWERVAULT MD3620I Owner's Manual

Removing a Host From a Host Group
You can remove a host from the Topology pane on the Mappings tab of the
Array Management Window. For more information, see "Removing a Host
Group" on page 105.

Moving a Host to a Different Host Group

To move a host to a different host group:
1 In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select Mappings Move.
• Right-click the host node, and select Move from the pop-up menu.
The Move Host dialog is displayed.
3 In the Select host group, select the host group to which you want to move
the host.
The Move Host Confirmation dialog is displayed.
4 Click Yes.
The host is moved to the selected host group with the following mappings:
• The host retains the specific virtual disk mappings assigned to it.
• The host inherits the virtual disk mappings assigned to the host group
to which it is moved.
• The host loses the virtual disk mappings assigned to the host group
from which it was moved.
104
Configuration: About Your Host