Moving A Host To A Different Host Group - Dell PowerVault MD3200 Owner's Manual

• Right-click the storage array or the Default Group, and select
Define Host Group from the pop-up menu.
4 Type the name of the new host group in Enter new host group name.
5 Select the appropriate hosts in the Select hosts to add area.
6 Click Add.
NOTE:
Remove.
7 Click OK.
The host group is added to the storage array.
Adding a Host to a Host Group
You can add a host to an existing host group or a new host group using the
Define Host Wizard. For more information, see "Defining a Host" on
page 86.
You can also move a host to a different host group. For more information, see
"Moving a Host to a Different Host Group" on page 89.
Removing a Host From a Host Group
You can remove a host from the Topology pane on the Mappings tab of the
Array Management Window. For more information, see "Removing a Host
Group" on page 90.

Moving a Host to a Different Host Group

To move a host to a different host group:
1 In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select Mappings Move.
• Right-click the host node, and select Move from the pop-up menu.
The Move Host dialog is displayed.
3 In the Select host group, select the host group to which you want to move
the host.
The Move Host Confirmation dialog is displayed.
To remove hosts, select the hosts in the Hosts in group area, and click
Configuration: About Your Host
89