Chapter 7 Maintenance
The following table describes the labels in this screen.
Table 22 Maintenance: Security
LABEL
Password
Change User ID
New Password
Re-enter New
Password
Current User ID
Password
Restore to
Factory Defaults
Apply
7.3 Diagnostics
Use the Diagnostics screen to ping a device to test the connection or to perform
a trace route.
Click Maintenance > Diagnostic to display the screen, then select either Ping
or Traceroute from the Select Utility menu to choose a test.
Figure 22 Maintenance: Diagnostic (Ping)
64
DESCRIPTION
Enter the login username whose password you want to change.
Type the new password in this field.
Passwords may be up to 16 characters in length and must be
alphanumeric (a-z, A-Z, 0-9), no other characters are allowed.
Type the new password again in this field.
Type the default password or the existing password (associated with
the username you enter above) you use to access the system in this
field.
Select Yes to restore the ZyXEL Device settings to the factory
defaults. Otherwise, select No to keep your ZyXEL Device settings.
Click Apply to save your changes.
P-974H/HW Series User's Guide