Advertisement
Quick Links
Advertisement
Related Manuals for ZyXEL Communications P964 APR 964
Summary of Contents for ZyXEL Communications P964 APR 964
- Page 1 P964 APR 964 Cable Router with 11g AP Quick Installation Guide VER. 1.0...
-
Page 2: Rear Panel Connections
Rear Panel Connections PORT CONNECTION CABLE Connect the F-type connector to the CATV outlet using a coaxial cable. POWER Connect the external power adaptor to the P964 APR and plug it into an appropriate power outlet. TO a COMPUTER TO a HUB LAN1~LAN4 Straight-through/Crossover Straight-through/Crossover... -
Page 3: Preparing Your Network
Preparing Your Network 1. Your computer must have a 10M or 100M NIC (Network Interface Card), USB interface or IEEE 802.11g/11b compatible client. 2. If using USB connection, you have to install the USB driver. Insert the supporting CD into the CD-ROM drive before you connect the USB port of P964 APR to the USB port on your computer and power on your P964 APR at the first time. -
Page 4: Setting Up Your Windows Nt/2000/Xp Computer
Verifying TCP/IP Properties 1. Click Start and then Run. In the Run window, type "winipcfg" and then click OK to open the IP Configuration window. 2. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway. Setting up Your Windows NT/2000/XP Computer Configuring TCP/IP 1. -
Page 5: Setting Up Your Macintosh Computer
Setting up Your Macintosh Computer Configuring TCP/IP Properties 1. Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via list. 3. Select Using DHCP Server from the Configure list. 4. -
Page 6: Troubleshooting
Troubleshooting Before performing troubleshooting, make sure both the P964 APR’s power (PWR) LED and the system status (SYS) LED are on. PROBLEM CORRECTIVE ACTION The PWR LED Make sure that the P964 APR’s power adaptor is connected to the is off. P964 APR and plugged in to an appropriate power source.