Table of Contents
Advertisement
Chapter 4 Basic
4.2 DHCP
Click Basic > DHCP to display the configuration screen. Use this screen to
configure DHCP and IP address settings on the LAN.
Figure 9 Basic: DHCP
The following table describes the labels in this screen.
Table 10 Basic: DHCP
LABEL
DHCP
DHCP Server
DHCP Server IP
DHCP Server
Mask
Starting Local
Address
DHCP Pools
Lease Time
Apply
44
DESCRIPTION
Select Yes to set the ZyXEL Device as a DHCP server. Otherwise, select
No.
Enter the LAN IP address of the ZyXEL Device in the fields provided.
Enter the subnet mask associated with the LAN IP address.
Specify the first of the contiguous addresses in the IP address pool.
Specify the number of IP addresses that the ZyXEL Device will give out
to DHCP clients.
Specify the time (in minutes between 1 and 71582788) a DHCP client is
allowed to use an assigned IP address. When the lease time expires,
the DHCP client is given a new, unused IP address.
Click Apply to save the settings.
P-974H/HW Series User's Guide
Advertisement
Table of Contents
