Summary of Contents for DREAMS Bethany Lifestyle Bed Sleepmotion 200i Double
Page 1
Bethany Lifestyle Bed Sleepmotion 200i Double King Super King 1 hour approx Two person assembly time assembly MK1 230419...
Page 2
Thank you Hello, thanks for choosing to purchase your bed from Dreams - you're now on your way to your best ever night's sleep. Before you begin building your bed, please take a moment to read through the instructions and make sure that you've got all the relevant parts listed on the following pages.
Parts Important information The bed you have purchased comes with an electric Sleepmotion base. Please follow the instructions that came with the base in the following order. Once the electric base is built please follow the instructions to build your bed-frame around the Sleepmotion base itself.
'NAPP by Dreams". Once downloaded and registered stand close to the bed and 'add device' then follow the instructions carefully. When connection is made you will be able to control the Bed using 'NAPP by Dreams'. Fittings Please check you have all the parts listed below with your product: Hardware needed for fixing side rails to headboard &...
Page 5
Screw in the legs and place the electric bed base in the position in which it is to be used Prepare headboard & footboard Fit the four feet (E) to headboard & footboard. & Bethany Sleepmotion Lifestyle Bed - Assembly guide - Page 5...
Page 6
To the pre-assembled headboard, fit the right hand side rail (D). 20mm Carefully position the electric bed base and plug in the power cable then raise the head and foot ends. Bethany Sleepmotion Lifestyle Bed - Assembly guide - Page 6...
Page 7
Connect the footboard (B) to the bracket on the side rail. iii. Do not tighten bolts 100% yet. Make sure everything is working properly then fit the second side rail (C). iii. 100% Make certain the bed is squared up as shown in the diagram then tighten all bed assembly bolts 100%. Bethany Sleepmotion Lifestyle Bed - Assembly guide - Page 7...
Page 8
Make certain the gaps around the bed base are even. 30mm 20mm Bethany Sleepmotion Lifestyle Bed - Assembly guide - Page 8...
Page 9
Technical Specifications Overall Dimensions (LWH cm) Double: 212 x 155.5 x 98 King: 222 x 170.5 x 98 222 x 205.5 x 98 Super King: Internal Dimensions (LWH cm) Double: 192 x 137.5 King: 202 x 152.5 Super King: 202 x 182.5 Bethany Sleepmotion Lifestyle Bed - Assembly guide - Page 9...
Care and maintenance Here are some tips to keep your new bed in tip-top condition Cleaning To clean your new bed, we'd advise using a warm damp cloth or if fabric, remove dust using a low suction vacuum cleaner - please do not use abrasive chemicals or bleach as this may damage the product.
Page 11
Little dreamers Keep the little ones entertained while you assemble your new purchase.
Need help?
Do you have a question about the Bethany Lifestyle Bed Sleepmotion 200i Double and is the answer not in the manual?
Questions and answers