HOMCOM 712-059V00 Manual page 8

2.Using a 6 mm Allen wrench, loosen the steering column alignment screw by
turning it counterclockwise.
3.Return steering column upright position to adjust. Prevent wheels from moving
and adjust handlebars, twisting right or left until the desired alignment of the
wheels and handlebars is reached.
4.Tighten screw to fasten steering column. Using a 6mm Allen Wrench again, tighten
the loosened screw by turning it clockwise, making sure to hold wheel bars to prevent
wheel motion.
5.Return steering column into upright position and lock quick release button into
place.
7