Testing The Connection; The Push Button; Uninstalling Your Driver - ZyXEL Communications OMNI.NET LITE Quick Start Manual

2. An icon in the system tray
indicates the status of the
connection.

Testing the Connection

When you finish the hardware connections, verify the connection by dialing
the phone number directly to make a call via the PHONE 1 or PHONE 2 port
over the ISDN line. See your User's Guide on how to assign or store phone
numbers on the TA.
If you have an Internet account already set up, make a data call to the ISP and
connect to the Internet.

The Push Button

The push button on the top panel of the TA is used to answer, dial or
disconnect a data call.
When there is an incoming data call, press this button to answer it.
When there is no incoming data call, press this button to dial an outgoing
data call using a pre-stored phone number.
When there is an on-line data call, press this button to drop it and tear
down the connection.

Uninstalling Your Driver

Screens for Windows XP are shown here.
1. Be sure your TA is turned on.
2. Click Start, select Settings to enter Control Panel. Double-click the
Phone and Modem Options (or the Modems) icon.
English
14