Testing The Connection To The Zyxel Device; Figure 51 Java (Sun); Figure 52 Pinging The G-470 - ZyXEL Communications ZyXEL ZyAIR G-470 User Manual

Figure 51 Java (Sun)

8.6 Testing the Connection to the ZyXEL Device

1 Click Start, (All) Programs, Accessories and then Command Prompt.
2 In the Command Prompt window, type "ping" followed by a space and the IP address of
the ZyXEL Device (192.168.1.11 is the default).
3 Press ENTER. The following screen displays.

Figure 52 Pinging the G-470

C:\>ping 192.168.1.11
Pinging 192.168.1.11 with 32 bytes of data:
Reply from 192.168.1.11: bytes=32 time=10ms TTL=254
Reply from 192.168.1.11: bytes=32 time<10ms TTL=254
Reply from 192.168.1.11: bytes=32 time<10ms TTL=254
Reply from 192.168.1.11: bytes=32 time<10ms TTL=254
Ping statistics for 192.168.1.11:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum =
Your computer can now communicate with the ZyXEL Device via the ETHERNET port.
Chapter 8 Troubleshooting
10ms, Average = 2m
G-470 User's Guide
85