Installation Requirements; Making Hardware Connections - ZyXEL Communications OMNI.NET LITE Quick Start Manual

Overview
This guide shows you how to connect and access the Internet through your
ISDN Terminal Adapter (TA). You should have an Internet account already
set up.
1. Make the hardware connections.
2. Check top panel LEDs for proper hardware operation.
3. Install your TA driver on your computer to configure the TA.
4. Create a dial-up connection.
5. Dial up a connection.

Installation Requirements

To install the TA, you will need the following:
•
Microsoft Windows 95, Windows 98 SE (Second Edition), Windows
Me, Windows 2000 or Windows XP
•
20MB of free disk space for the driver
•
A computer with a 25-pin serial port
•
An RS-232 cable
•
RJ-11 and/or RJ-45 cables

1 Making Hardware Connections

1. Connect your analog phone device(s) to the PHONE 1 and/or PHONE 2
port(s) using RJ-11 cable(s).
2. Connect the TA to the ISDN network using the included ISDN cable.
Connect one end of the RJ-45 cable to the port labeled ISDN and the
other to the ISDN wall jack and/or the NT-1 device. See your User's
Guide for more information.
3. Connect the female end of the RS-232 cable to the TO DTE port and the
other end to the serial port (such as COM1 or COM2) on your computer.
4. Connect to a power source using the included 16V AC power adaptor.
5. Turn the TA on by flipping the power switch up.
English
1