The Priority Override Configuration Screen - ZyXEL Communications MES-2110 User Manual

Chapter 19 QoS
Use this to assign DSCP priority settings. Click Configuration > QoS Menu > IP
DSCP Priority to open the following screen.
Figure 76 Configuration > QoS Menu > IP DSCP Priority
The following table describes the labels in this screen.
Table 60 Configuration > QoS Menu > IP DSCP Priority
LABEL
Number
Priority
Undo
Apply

19.6 The Priority Override Configuration Screen

Use this screen to apply the QoS settings of the Switch to its DHCP clients.
Switch ignores the priority levels assigned to the transmitted frames on the ports, source
MAC addresses and destination MAC addresses.
140
DESCRIPTION
This is the DSCP classification identification number.
Assign a Switch's priority level (Low, Normal, Preferred or
High) to the DSCP value.
Click this to load your last saved settings.
Click this to save your changes.
The
MES-2110 User's Guide