The Mac Limit Configuration Screen - ZyXEL Communications MES-2110 User Manual

18.5 The MAC Limit Configuration Screen

Use this screen to limit the number of MAC addresses that can be learned on a
port. Click Configuration > MAC Menu > MAC Limit Config to open the
following screen.
Figure 72 Configuration > MAC Menu > MAC Limit Config
The following table describes the labels in this screen.
Table 56 Configuration > MAC Menu > MAC Limit Config
LABEL
MAC Limit Function
Port
Limit Quantity
Action
Undo
Apply
MES-2110 User's Guide
DESCRIPTION
Use this to enable or disable the MAC address limit feature.
This is the port number.
Use this field to limit the number of (dynamic) MAC addresses
that may be learned on a port. For example, if you set this field to
"5" on port 2, then only the devices with these five learned MAC
addresses may access port 2 at any one time. A sixth device
would have to wait until one of the five learned MAC addresses
aged out. MAC address aging out time can be set in the MAC
Table Status screen.
Enable the MAC limit function on this port. The Switch forwards
frames whose MAC address(es) is in the MAC address table on
this port. frames with no matching MAC address(es) are dropped.
Disable the MAC limit function to forwards all frames on this port.
Click this to load your last saved settings.
Click this to save your changes.
Chapter 18 MAC
133