The Priority Override Configuration Screen - ZyXEL Communications MES-2110 User Manual

21.6 The Priority Override Configuration Screen

Use this screen to apply the QoS settings of the MES-2110 to its DHCP clients.
MES-2110 ignores the priority levels assigned to the transmitted frames on the ports,
source MAC addresses and destination MAC addresses.
Click Configuration > QoS Menu > Priority Override Configuration to open
the following screen.
Figure 79 Configuration > QoS Menu > Priority Override Configuration
The following table describes the labels in this screen.
Table 64 Configuration > QoS Menu > Priority Override Configuration
LABEL
Port
VID-Pri-Override
Destination-MAC-Pri-
Override
Source-MAC-Pri-
Override
MES-2110 User's Guide
DESCRIPTION
This label shows the port you are configuring.
Select Enable to have the MES-2110 ignore the priority level
assigned to the transmitted frames on this port.
Select Disable if you do not want to use this feature. This is
selected by default.
Select Enable to have the MES-2110 ignore the priority level
assigned to the transmitted frames on the destination MAC
address.
Select Disable if you do not want to use this feature. This is
selected by default.
Select Enable to have the MES-2110 ignore the priority level
assigned to the transmitted frames on the source MAC address.
Select Disable if you do not want to use this feature. This is
selected by default.
Chapter 21 QoS
The
163