The Vlan Stacking Configuration Screen - ZyXEL Communications MES-2110 User Manual

Chapter 11 VLAN
Configure the fields as highlighted in the Switch VLAN Stacking screen.
Table 31 Single and Double Tagged 802.11Q Frame Format
DA
DA SA SPTPID Priority
Table 32 802.1Q Frame
DA
SA
(SP)TPID
VID

11.5.6 The VLAN Stacking Configuration Screen

Use this screen to
Menu > Tag-Based > VLAN Stacking to open the following screen.
Figure 41 Configuration > VLAN Menu > Tag-Based > VLAN Stacking
90
DA
SA TPID Priority VID
VID TPID Priority VID
Destination Address
Source Address
(Service Provider) Tag Protocol
IDentifier
VLAN ID
enable VLAN stacking on the Switch.
SA Len/ Data
Etype
Len/ Data
Etype
Len/ Data
Etype
Priority 802.1p Priority
Len/ Length and type of Ethernet
Etype frame
Data Frame data
FCS Frame Check Sequence
Click Configuration > VLAN
MES-2110 User's Guide
FCS Untagged
Ethernet
frame
FCS IEEE 802.1Q
customer
tagged
frame
FCS Double-
tagged
frame