Dell Photo All-in-One Printer 942 Owner's Manual page 27

Load up to: Make sure:
20 sheets of • You remove any paper from the paper support before inserting banner paper.
banner paper
• You place a stack of banner paper on or behind the printer, with only the number
of sheets required.
NOTE: You must select A4 Banner or Letter Banner paper size in Printing
Preferences. Failure to do so will cause a paper jam. See "Paper Problems" on
page 72.
• You load the leading edge of the banner paper into the printer against the right
side of the paper support.
• You squeeze and slide the paper guide to the left edge of the banner paper.
• You use banner paper designed for inkjet printers.
10 envelopes • The print side of the envelopes faces up.
• The envelopes are loaded vertically against the right side of the paper support.
• The stamp location is in the upper left corner.
• The paper guide rests against the left edge of the envelopes.
• You print the envelopes with Landscape orientation.
• You select the correct envelope size. Select the next biggest size if the exact
envelope size is not listed, and set the left and right margins so that your
envelope text will be correctly positioned.
NOTE: You can load a single envelope into the paper support without removing
plain paper.
27
Getting Started