System Statistics Screen; Figure 12 System Status: Show Statistics; Table 3 System Status: Show Statistics - ZyXEL Communications 802.11b/g Wireless Access Point NWA-1100 User Manual

802.11b/g wireless access point
Hide thumbs Also See for 802.11b/g Wireless Access Point NWA-1100:
Table of Contents

Advertisement

Table 2 The Status Screen
LABEL
LAN
WLAN
System Status
Statistics
Association List
View Log

3.1.1 System Statistics Screen

Use this screen to view read-only information, including 802.11 Mode, Channel ID, Retry
Count and FCS Error Count. Also provided is the "poll interval". The Poll Interval field is
configurable. The fields in this screen vary according to the current wireless mode of each
WLAN adaptor.
Click Status > Show Statistics. The following screen pops up.

Figure 12 System Status: Show Statistics

The following table describes the labels in this screen.

Table 3 System Status: Show Statistics

LABEL
Description
802.11 Mode
Channel ID
RX PKT
TX PKT
Retry Count
FCS Error
ZyXEL NWA-1100 User's Guide
DESCRIPTION
This field displays the number of wireless clients currently associated to
the first wireless module. Each wireless module supports up to 32
concurrent associations.
This field displays the number of wireless clients currently associated to
the second wireless module. Each wireless module supports up to 32
concurrent associations.
Click this link to view port status and packet specific statistics. See
3.1.1 on page
41.
Click this to see a list of wireless clients currently associated to each of the
ZyXEL Device's wireless modules. See
Click this to see a list of logs produced by the ZyXEL Device. See
13 on page
115.
DESCRIPTION
This field shows which mode (802.11b Only, 802.11g Only, 802.11b+g) the
ZyXEL Device is using.
Click this to see which wireless channels are currently in use in the local area.
See
Section 14.5 on page
122.
This is the number of received packets on this port.
This is the number of transmitted packets on this port.
This is the total number of retries for transmitted packets (TX).
This is the ratio percentage showing the total number of checksum error of
received packets (RX) over total RX.
Chapter 3 Status Screens
Section
Section 14.4 on page
121.
Chapter
41

Advertisement

Table of Contents
loading

Table of Contents