Scanning To A Flash Drive Or Memory Card; Scanning Photos Into An Editing Application - Dell All-in-One Wireless Printer V715w User Manual

6
Press the arrow buttons to select the resolution quality and the original image size. Press
a selection.
7
Press to start scanning.
The scan is complete when the application you selected in step 5 opens on the destination computer, and the scan
appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.
1
Load an original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel, press
3
Press the up or down arrow button to scroll to Memory Device.
4
Insert the flash drive or memory card, and then press
5
Press the arrow buttons to select the resolution quality, the output file type you want to create, and the original
image size. Press each time you make a selection.
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.
6
Press to start scanning.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.

Scanning photos into an editing application

Using the printer control panel
1
Load the photo or photos facedown on the scanner glass.
2
From the printer control panel, press
3
Press the left or right arrow button to scroll to USB or the name of the network computer to receive the scan, and
then press .
The local or network computer is the destination that will receive the scan.
Notes:
•
You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
4
Wait until the printer has finished downloading the list of scan applications available on the selected computer.
5
Press the left or right arrow button to select a photo editing application, and then press
6
Press the arrow buttons to select the resolution quality, the type of output you want to create, and the original
image size. Press each time you make a selection.
7
Press to start scanning.
.
.
.
Scanning
54
each time you make
.