Managing Print Jobs - Dell All-in-One Wireless Printer V715w User Manual

4
From the 2-Sided Printing section, select On from the drop-down menu.
Note: To use the settings defined in the printer, select Use Printer Settings.
5
Select either the Sideflip or Topflip option. Sideflip is the setting most often used.
6
Select Extend Dry Time, and then select a setting. In regions with high humidity, select Extended.
7
Click OK to close any printer software dialogs.
8
Click OK or Print.
Note: To return to single-sided printing, return to the Advanced tab. From the 2-Sided Printing section, select
Off from the drop-down menu.
Printing on both sides of the paper (duplexing) manually
With a document open, click File  Print.
1
2
Click Properties, Preferences, Options, or Setup.
3
Click the Advanced tab.
4
From the 2-Sided Printing section, select Manual.
Note: The Print Instruction Page to Assist in Reloading item is selected automatically.
5
Click OK. The printer prints the odd-numbered pages and the instruction sheet.
6
Flip and reload the paper, following the directions on the instruction sheet to complete the print job.
Note: To return to single-sided printing, return to the Advanced tab. From the 2-Sided Printing section, select
Off from the drop-down menu.

Managing print jobs

Setting your printer as the default printer
Your printer should be selected automatically from the Print dialog when you send a print job. If you have to manually
select your printer, then it is not the default printer.
To set the default printer:
1
Click , or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
Printing
44