c
Press the arrow buttons to select whether you want to add a contact manually or import a contact. Press
when you make a selection.
•
If you want to add a contact manually, then use the keypad to enter the fax number, and then press
•
If you want to import a contact, then press the arrow buttons to select a contact from the Address Book
or the Redial List. Press
d
When you are finished adding contacts to the group, select Done.
Sending faxes
ADF
Use the ADF for multiple-page documents.
Note: The ADF is available only on selected models. If you
purchased a printer without an ADF, load original
documents or photos on the scanner glass.
Tips for sending faxes
Before you send a fax:
•
Make sure that the printer is on and connected to a working telephone, DSL, or VoIP line. The line is working if
you hear a dial tone.
•
Load an original document faceup into the ADF or facedown on the scanner glass.
•
When using the ADF, adjust the paper guide on the ADF to the width of the original document.
•
When using the scanner glass, close the scanner lid to avoid dark edges on the scanned image.
Sending faxes using the printer control panel
1
From the printer control panel, press
2
Enter a fax number, or press Address Book to select a number from the Speed Dial or Group Dial list.
3
If you want to send a fax to a single recipient, then press
when you make a selection.
Scanner glass
Use the scanner glass for single pages, small items (such as
postcards or photos), transparencies, photo paper, or thin
media (such as magazine clippings).
.
Faxing
72
.
.