Chamberlain SENTEX INFINITY User Manual page 19

15 - ENTERING A SINGLE CARD
Validating a single card to be used for entry. This is an optional
function. If a system in the chain is not equipped with this
function, this programming area cannot be entered. For the
number of cards each system will hold, see Verifying and
Printing Entries, programming number 22 Verifying Entries,
page 22.
1. Card codes must always be entered as 5 digits.
2. Card will be subjected to time zone 1 restrictions. Time zone
"0" is unrestricted.
3. Choose relays used by a door. Relays 1, 3 for door 1.
Relays 2, 4 for door 2.
4. These prompts will not appear if your system is not equipped
with the option that allows names to be associated with cards
and/or codes. Limit is 13 characters.
16 - ENTERING GROUPS OF CARDS
This allows large quantities of cards to be entered at the same
time. However, names may not be associated with these cards in
this process. If a system in the chain is not equipped with the
card access option, this programming area cannot be entered.
1. Card codes must always be entered as 5 digits. Be sure that
the group of card codes you are entering does not include
numbers already in the system.
2. All cards will be subject to the same time zone.
3. Ending card code must be higher than first card code. If you
ask a unit to group enter more cards than the unused capacity
of the system, an error message will be displayed. This error
message will tell you how many cards you are trying to enter
and how much capacity is left. You must then erase enough
existing cards to allow this group to be entered, or enter the
cards individually or in smaller groups.
17 - MAKING CARDS WORK AS ENTRY CODES
Allows card codes to be used as digital entry codes on the
system's keypad(s). If this feature is activated, the system will
automatically set the number of digits in the entry codes to 5 (in
programming number 08).
STEP 1
ENTER CARD CODE _____
STEP 2
ENTER TIME ZONE (0 FOR ANY
TIME,OR 1-7) _
(CAUTION: TIME ZONES 1-7 MIGHT
NOT BE THE SAME IN ALL UNITS)
STEP 3
ENTER VALID DOOR (1, 2 OR BOTH = 3)
STEP 4
ENTER NAME
_____________
STEP 1
ENTER FIRST CARD CODE _____
STEP 2
ENTER TIME ZONE (0 FOR ANY
TIME, OR 1-7) _
(CAUTION: TIME ZONES 1-7 MIGHT
NOT BE THE SAME IN ALL UNITS)
STEP 3
ENTER LAST CARD CODE _____
SHOULD CARD CODES ALSO WORK
AS ENTRY CODES (1=YES 0=NO) _
19
_