Invacare LiNX Chin Control User Manual page 5

WARNING!
Risk of Injury or Damage to the Power Wheelchair
Risk of unintended movement of the power wheelchair or
seating system when loose personal belongings (e.g.
jewellery, scarfs) become entangled around the joystick.
— Make sure that any loose items are clear of the joystick
when your power wheelchair is powered up.
— Power off your power wheelchair immediately to stop
any movement.
WARNING!
Risk of Injury or Damage due to Electrical Shorts
Connector pins on cables connected to the power module
can still be live even when the system is off.
— Cables with live pins should be connected, restrained or
covered (with non-conductive materials) so that they are
not exposed to human contact or materials that could
cause electrical shorts.
— When cables with live pins have to be disconnected, for
example, when removing the bus cable from the remote
for safety reasons, make sure to restrain or cover the
pins (with non-conductive materials).
CAUTION!
Risk of Injury due to Unintended Movement
It is recommended that the power wheelchair, fitted with a
Gyro module, has a drive function with disabled Gyro. If the
power wheelchair is used in a moving vehicle (e.g. boat, bus
1662641-C
or train) maybe t he Gyro function is impaired and drive
demands can result in unintended m ovement.
— When driving on a moving vehicle choose a drive
function w ith disabled Gyro.
— If the power wheelchair does not have a drive function
with disabled Gyro, contact your Invacare provider.
CAUTION!
Risk of Injury from Hot Surfaces
Remote module can get hot when exposed to strong
sunlight for long periods.
— Do not leave power wheelchair in direct sunlight for long
periods.
NOTICE!
If you touch the connector pins, they can become dirty or
they can be damaged by electrostatic discharge.
— Do not touch the connector pins.
NOTICE!
There are no user-serviceable parts inside any case.
— Do not open or disassemble any case.
1 General
5