Reolink TrackMix B770 Manual page 4

camera before initial setup. After a startup sound, you will hear a repeated Ding
sound or a voice prompt.
Note: The voice prompt you will hear may be "Welcome to Reolink, please install
Reolink App and scan the QR code on the camera" in multilingual versions, or "please
run Reolink App, add the camera and set it up".
Step 2. Tap the icon
in the top right corner to start the initial setup.
Step 3. Scan the QR code on the back of the camera. You may tap Light to enable
a flashlight when setting up the camera in a dark environment. If the phone doesn't
respond, please tap Input UID/IP and then manually type in the UID (16-digit
characters under the QR code of the camera). Then click Next.