Advertisement
Quick Links
E1 Zoom
Reolink E1 Zoom is also doing well at night, with 10pcs IR LEDs to cover up to 40ft
in low-light conditions. It catches a glimpse of your house in Super HD. Or zoom in
to see the details of what you care, without image impairment.
1. Specs
1
Daylight Sensor
2
10 IR LEDs
3
Lens
4
Status LED
5
Built-in Mic
6
Reset Button
7
Micro SD Card Slot
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Reolink E1 Zoom
Summary of Contents for Reolink E1 Zoom
- Page 1 E1 Zoom Reolink E1 Zoom is also doing well at night, with 10pcs IR LEDs to cover up to 40ft in low-light conditions. It catches a glimpse of your house in Super HD. Or zoom in to see the details of what you care, without image impairment.
- Page 2 Note: The package content may vary and update with different version and platforms, please take the below information only for a reference. And the actual package content are subject to the latest information on the product selling page. E1 Zoom...
- Page 3 Power Adapter*1 E1 Zoom *1 Mounting Plate *1 Quick Start Guide*1 Reset Needle*1 Surveillance Sticker*1 Pack of Screws*1 Mounting Template *1 Set up the Camera on the App You may follow the steps below to set up the camera. Step 1. Tap the icon in the top right corner to start the initial setup.
- Page 4 Step 3. Tap Wi-Fi Not Configured. Make sure your camera stays powered on and tap Next. Step 4. If you hear the voice prompts as shown in the picture or a repeated ding sound, tick correspondingly and tap Next.
- Page 5 Step 5. Enter the WiFi password of the selected WiFi network and tap Next. Note: E1 Zoom support a 2.4 GHz or 5GHz WiFi network of your choice. Step 6. Tap Scan Now. Place the QR code on your phone in front of the camera’s lens at a distance of about 20 cm (8 inches) and let the camera scan...
- Page 6 Step 7. Wait around 60 seconds for the camera to connect to the router. If you hear "connection to the router succeeded", tick correspondingly and tap Next. Note: If you heard the voice prompt "Connection to the router failed", please make sure you've entered the WiFi information correctly in the previous step.
- Page 7 Step 9. Name your camera. Then tap Next. Step 10. Initialization finished. You can start using your camera now.
- Page 8 Install the Camera Here is a guide on how to install the camera to the ceiling. Step 1. Install the Mounting Plate. Drilling two screw holes on the wall according to the mounting hole template. Insert the two plastic anchors into the holes in the wall. ...
- Page 9 Step 2. Attach the Camera. Align the camera with the bracket, then turn the camera unit clockwise to lock it in position. Notes: To remove it from the ceiling, turn the camera counterclockwise. ...
- Page 10 In case your camera is mounted upside down, its picture shall be rotated as well. Please go to Device Settings > Display on Reolink App/Client and click Flip Vertical to adjust the image.
Need help?
Do you have a question about the E1 Zoom and is the answer not in the manual?
Questions and answers