TP-Link BE7200 User Manual page 113

Chapter 16
You have three options:
• Use Default MAC Address
case the ISP does not bind the assigned IP address to the MAC address.
• Clone Current Device MAC
that is connected to the router, in case the ISP binds the assigned IP address to the
MAC address.
• Use Custom MAC Address
and enter the correct MAC address in this field, in case the ISP binds the assigned IP
address to the specific MAC address.
• To Set up NAT
The router's NAT (Network Address Translation) feature makes devices on the LAN
use the same public IP address to communicate with devices on the internet, which
protects the local network by hiding IP addresses of the devices.
1. If you want to enable NAT, tick the checkbox, and click SAVE.
• To change the Internet Port Negotiation Speed Setting
You can change the internet port speed mode.
• To enable Flow Controller
- Do not change the default MAC address of your router in
- Select to copy the current MAC address of the computer
- Select if your ISP requires you to register the MAC address
Auto Negotiation
Customize Your Network Settings
is recommended.
109