TP-Link BE7200 User Manual page 25

Chapter 4
4 ) 6to4 Tunnel:
connection type
Settings to input further information if your ISP requires. Click
click CONNECT.
5 ) Pass-Through (Bridge):
5. Configure LAN ports. Windows users are recommended to choose from DHCPv6 and
SLAAC+Stateless DHCP. Fill in
An IPv4 internet connection type is a prerequisite for this
(Manually Set Up Your Internet
Click SAVE
Address Prefix
Set Up Internet Connection
Connection). Click
and skip to Step 6.
provided by your ISP, and click SAVE.
Advanced
SAVE and then
21