TP-Link BE7200 User Manual page 130

Chapter 17
2. Go to Advanced >
Management section as needed.
• Forbid all devices to manage the router remotely:
Do not tick the Enable
• Allow all devices to manage the router remotely:
1. Tick the Enable checkbox of
2. Keep the HTTPS port as default settings (recommended) or enter a value between
1024 and 65535.
3. Select All Devices
4. Click SAVE.
Devices on the internet can log in to
as https://113.116.60.229:1024) to manage the router.
Tips:
• You can find the WAN IP address of the router on
• The router's WAN IP is usually a dynamic IP. Please refer to
in to the router through a domain name.
• Allow a specific device to manage the router remotely:
System > Administration
checkbox of Remote
Remote Management.
for Remote Management.
https://Router's WAN IP address:port number
Network Map
and complete the settings in
Management.
> Internet.
Set Up a Dynamic DNS Service Account
Manage the Router
Remote
(such
if you want to log
126