Advertisement
Chapter 17
3. The router's satellite devices will appear on the table. Click
see whether the latest firmware is released. If you want to update a satellite device,
click
on the right of the corresponding device.
Note: The update will take a few minutes and the satellite router will reboot.
17. 2. Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the router. You can
backup the configuration file to your computer for future use and restore the router to
a previous settings from the backup file when needed. Moreover, if necessary you can
erase the current settings and reset the router to the default factory settings.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
•
To backup configuration settings:
Click
BACK UP
to save a copy of the current settings to your local computer. A '.bin' file
of the current settings will be stored to your computer.
•
To restore configuration settings:
1. Click
UPLOAD
to locate the backup configuration file stored on your computer, and
click RESTORE.
System Tools
>
Backup &
CHECK FOR UPDATES
Restore.
Manage the Router
to
121
Advertisement
Need help?
Do you have a question about the BE7200 and is the answer not in the manual?