TP-Link BE7200 User Manual page 77

Chapter 13
3 ) Click SAVE.
To bind the unconnected device:
1 ) Click in the
2 ) Enter the MAC Address
3 ) Click SAVE.
Done!
Now you don't need to worry about ARP spoofing and ARP attacks!
13. 4. ALG
ALG allows customized NAT traversal filters to be plugged into the gateway to support
address and port translation for certain application layer "control/data" protocols such
as FTP, TFTP, H323 etc. It is recommended to keep the default settings.
You may need to disable SIP ALG when you are using voice and video applications to
create and accept a call through the router, since some voice and video communication
applications do not work well with SIP ALG.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
Binding List section.
and IP Address
Security > ALG.
that you want to bind.
Network Security
73