Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Pitco SRTE14S
Summary of Contents for Pitco SRTE14S
- Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. PITCO SRTE14S Owner's Manual Shop genuine replacement parts for PITCO SRTE14S Find Your PITCO Water Cooler Parts - Select From 4 Models -------- Manual continues below --------...
- Page 2 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model #: ___________________________ Serial #: ___________________________ Date Purchased: ____________________ Installation & Operation Manual Model SRTE Floor Model Electric Rethermalizer Built after 8/2005 L20-292, rev.
- Page 3 Parts (ASAP) companies, this warranty will be DO NOT turn the appliance on until the heating void. In addition, Pitco and its affiliates will not be elements are fully covered with water at all times. liable for any claims, damages or expenses incurred...
-
Page 4: Table Of Contents
TABLE OF CONTENTS SRTE: Electric Floor Model Rethermalizer 1. INSTALLATION..................1 1.1. CHECKING YOUR NEW APPLIANCE..................1 1.2. INSTALLATION CLEARANCES ....................2 1.3. LEG/CASTER INSTALLATION AND LEVELING ................. 2 1.4. PLUMBING CONNECTIONS......................3 1.4.1. WATER INLET CONNECTIONS..................... 3 1.4.2. DRAIN CONNECTIONS......................3 1.5. - Page 5 TABLE OF CONTENTS 3.2. MONTHLY PREVENTATIVE MAINTENANCE ................12 3.2.1. DELIMING ..........................12 3.3. ANNUAL/PERIODIC PREVENTATIVE MAINTENANCE AND INSPECTION......12 3.3.1. HEATING ELEMENT ......................12 3.3.2. TEMPERATURE PROBE & HIGH LIMIT PROBE ..............12 3.3.3. CONTROLLER ........................12 3.3.4. CONTROL BOX & ELECTRICAL COMPONENTS............... 12 3.3.5.
-
Page 6: Installation
1.1. CHECKING YOUR NEW APPLIANCE Your new Pitco appliance has been carefully packed into one crate. Every effort has been made to ensure that it is delivered to you in perfect condition. As you unpack your new appliance, inspect each of the pieces for damage. -
Page 7: Installation Clearances
INSTALLATION 1.2. INSTALLATION CLEARANCES The clearances shown below are for combustible and non-combustible installations and will allow for safe and proper operation of your appliance. Combustible Construction Non Combustible Construction Inches (centimeters) Inches (centimeters) Back 6.0" (15.24cm) 0.0" (0.0cm) Sides 6.0"... -
Page 8: Plumbing Connections
INSTALLATION SRTE: Electric Floor Model Rethermalizer 1.4. PLUMBING CONNECTIONS The plumbing installation should be done by a licensed plumber and must comply with local and national codes. 1.4.1. WATER INLET CONNECTIONS If a faucet or water fill option is equipped on your appliance connections to a potable water supply will be required. -
Page 9: Electrical Connections
INSTALLATION 1.5. ELECTRICAL CONNECTIONS It is advised that this power supply be plugged into a wall receptacle that is controlled by the ventilation control. This will prevent the appliance from being operated without the ventilator on. If your appliance requires an electrical connection, the power requirements are listed below. WARNING Voltage/Phase KW Amps... -
Page 10: Ventilation And Fire Safety Systems
INSTALLATION SRTE: Electric Floor Model Rethermalizer 1.6. VENTILATION AND FIRE SAFETY SYSTEMS Your new appliance must have proper ventilation to function safely and properly. It is very important to install a fire safety system. Your ventilation system should be designed to allow for easy cleaning. Frequent cleaning and proper maintenance of the ventilation system and the appliance will reduce the chances of fire. -
Page 11: Operation
OPERATION 2. OPERATION An operator’s manual for your appliance’s specific control type should be included with this manual. Refer to that manual prior to operating this appliance. 2.1. OPERATIONAL FEATURES The diagram below outlines some of the key operational components of your appliance. Refer to the following sections of this manual to learn more about these features. - Page 12 OPERATION SRTE: Electric Floor Model Rethermalizer 1. Cook Tank 2. Controller (Not on all Models) Controls the water temperature inside the cook tank. Optional timers are located on the controller (if equipped). If the controller has an ON/OFF button, it will be used to turn ON the controller as well as other features on the appliance.
-
Page 13: Filling The Appliance
OPERATION 2.2. FILLING THE APPLIANCE 2.2.1. FILLING THE COOKER TANK It is recommended that the cooker tank is filled with hot water. This will greatly decrease the time it takes for the appliance to reach operating temperature. Refer to the following procedure to fill the cook tank prior to operation. -
Page 14: Appliance Start Up
OPERATION SRTE: Electric Floor Model Rethermalizer 2.3. APPLIANCE START UP Refer to the following procedure to start the appliance prior to operation. 1. Ensure that the drain valve is closed. 2. Fill the cook tank with water. (See section 2.1 “Filling the Appliance”) 3. -
Page 15: Timer Operation
OPERATION 2.4.3. TIMER OPERATION Not all control types include timers. Timers provide accurate cook times for multiple product quantities and types. Refer to the operator’s manual for your appliance’s specific control type to determine how to set the cook timers if equipped. To start a timer: Press the appropriate timer button. -
Page 16: Preventative Maintenance
PREVENTATIVE MAINTENANCE SRTE: Electric Floor Model Rethermalizer 3. PREVENTATIVE MAINTENANCE 3.1. DAILY PREVENTATIVE MAINTENANCE Performing the preventative maintenance steps below on a daily basis will keep your equipment safe and at peak performance. During the cooking process, starch build up will form on the temperature probes, tank and heating element. -
Page 17: Monthly Preventative Maintenance
This section should ONLY be performed by a qualified service technician as part of a regular kitchen maintenance program. This inspection should take place a minimum of once a year by an Authorized Service Technician recommended by Pitco. It may be WARNING necessary perform this inspection more then once a year. -
Page 18: Tank
PREVENTATIVE MAINTENANCE SRTE: Electric Floor Model Rethermalizer 3.3.5. TANK Verify that the tank is in good condition. Check for scale build up and inspect for signs of corrosion. Verify that tank is leak free. Check drain overflow (if equipped) for scale build up and debris blockage. -
Page 19: Troubleshooting
TROUBLESHOOTING 4. TROUBLESHOOTING 4.1. POWER FAILURE If electric power is removed for any reason, the appliance will shut down. To restart the appliance, follow the appliance start up procedure in section 2.2. CAUTION DO NOT attempt to operate this appliance during a power outage. 4.2. -
Page 20: Troubleshooting Chart
TROUBLESHOOTING SRTE: Electric Floor Model Rethermalizer 4.4. TROUBLESHOOTING CHART Problem Probable Causes Corrective Actions No power to appliance. Check main building power supply. Circuit Breaker tripped. Reset circuit breaker. Controller does not Flip I/0 switch to I position and turn on I/0 Switch in 0 position. - Page 21 (800) 258-3708 US and Canada only or representative (ASAP) covering your area, or (603) 225-6684 World Wide contact Pitco at the numbers listed to the left. Website Address: www.pitco.com MAILING ADDRESS – P.O. BOX 501, CONCORD, NH 03302-0501 SHIPPING ADDRESS – 10 FERRY ST., CONCORD, NH 03301...
Need help?
Do you have a question about the SRTE14S and is the answer not in the manual?
Questions and answers