Pitco P90K Installation And Operation Manual

IMPORTANT FOR FUTURE REFERENCE

Please complete this information and retain this manual

for the life of the equipment:

Model #: __________________________

Serial #: __________________________

Date Purchased: ___________________

Installation and Operation Manual

Covering Models

P90K

L20-270-UK Rev.00 11/16/04

Table of Contents

Need help?

Do you have a question about the P90K and is the answer not in the manual?

Page 1 IMPORTANT FOR FUTURE REFERENCE Please complete this information and retain this manual for the life of the equipment: Model #: __________________________ Serial #: __________________________ Date Purchased: ___________________ Installation and Operation Manual Covering Models P90K L20-270-UK Rev.00 11/16/04...
Page 2 THIS MANUAL MUST BE RETAINED FOR FUTURE REFERENCE WARNING When working with HOT oil, protective clothing should be used. This should include, but not be limited to, insulated rubber gloves, eye protection or face mask and long sleeves. WARNING This machine is designed to operate on a specific voltage. This information can be found on the data plate located on the rear of the machine.
Page 3 ASSEMBLY Place the Paper Support Rack inside the filter envelope so that the threaded coupling fits into the hole cut in the top of the paper. Fold the open end of the filter envelope over two times and push the Clip over folded end of filter envelope.
Page 4 (800) 258-3708 US and Canada only or Representative (ASAP) covering your area or (603) 225-6684 World Wide contact Pitco at the numbers listed to the left. MAILING ADDRESS – P.O. BOX 501, CONCORD, NH 03302-0501 SHIPPING ADDRESS – 10 FERRY ST., CONCORD, NH 03301...