ALGE-Timing Timy 2 Manual page 9

7.2.2 Select Finish Time
If several finish times are assigned to a bib, the first one is automatically used as the valid
finish time. The other finish times are invalid and marked with a question mark (?). If you
want to select a different finish time, proceed as follows:
• press key
(Finish)
• input the bib that you want to copy and confirm with
• select with the arrow key
• confirm with key
• the previous finish time is now marked with „c" (CLEAR) and as well printed
• the new selected finish time is marked with „i" (INPUT) and as well printed
• press key
(End) to exit the menu
7.2.3 Copy Finish Time to Another Bib
It is possible to copy a finish time from an assigned bib to another bib.
• press key
(Finish)
• input the bib that you want to copy and confirm with
• press key
(Copy)
• input bib of racer that should get the start time and confirm with
• press key
(End) to exit the menu
Attention: If necessary, delete the finish time of the runner from which you copied.
7.3 Edit Run Times
In this menu you manage the run timed of the competitors. It is possible to correct, delete or
copy a run time to another bib. The function key labelling must show the following "Start FIN-

ISH RT ". If a different text is displayed, you must press the key until the correct text
appears.
7.3.1 Overwrite Run Times
A running time that is not saved in the timing device can be corrected as follows:
• press key
(RT)
• input the bib that you want to copy and confirm with
• the first digit of the time field blinks and the new time can be input
• confirm with key
• press key
(End) to exit the menu
Stopwatch
the target finish time (a marker is at the end of the line)
- 9 -
or (Input)
or (Input)
or (Input)