ALGE-Timing Timy 2 Manual page 10

7.3.2 Select Run Time
If several run times are assigned to a bib, the first one is automatically used as the valid run
time. The other run times are invalid and marked with a question mark (?). If you want to se-
lect a different run time, proceed as follows:
• press key
(RT)
• input the bib that you want to copy and confirm with
• select with the arrow key
• confirm with key
• the previous run time is now marked with „c" (CLEAR) and as well printed
• the new selected run time is marked with „i" (INPUT) and as well printed
• input the bib that you want to copy and confirm with
7.3.3 Copy Run Time to Another Bib
It is possible to copy the run time from one bib to another.
• press key
(RT)
• input the bib that you want to copy and confirm with
• press key
(Copy)
• input bib of racer that should get the run time and confirm with
• press key
(End) to exit the menu
Attention:
If necessary, delete the run time of the runner from which you copied!
8 Additional Functions of the Function Keys
Starting with the second run you can choose whether the running time or total time should be
shown on the display and on the scoreboard.
The function key labelling must display the following "RT/tt SS SC
displayed, you must press the key
Running Time = running time of the ongoing run
Total Time = sum of all run times of previous runs and the actual run
Every time you press "RT/tt" with the button
the total time showing on the display and display board.
8.1 PT – Enter a Penalty Time
With this function you can add penalty seconds to a participant's running time. The function
key labeling must display the following "RT/tt SS SC
you must press the key until the correct text appears.
• let the racer reach the finish so he has a valid run time
• make sure the bib is in the finish display area which receives penalty seconds
• press key
(PT)
• input penalty seconds (e.g. 4 seconds)
• confirm penalty seconds with key
Timy3 - Stopwatch
the target run time (a marker is at the end of the line)
until the correct text appears.
, it switches between the running time and

or (Input)
- 10 -
or (Input)
or (Input)
or (Input)

". If a different text is
". If a different text is displayed,