ALGE-Timing Timy 2 Manual page 7

6 Focus (Timing List)
The "Timing list" sector in the display allows to view chronologically all times of competitors
who are started. The times are displayed chronologically in the starting order. If you use the
"Focus" function, the last running time is displayed in the first line of the timing list.
The function key label shows the following: „Memo Disq Focus
shown press the key
A list of times is always shown on the display. If you press the button
time stopped in the top line of the timing list. Please note that this always changes the time
list. Pressing one of the two buttons
Further Focus Functions:
jumps to first time of timing list:
jumps to last time of timing list:
7 Edit Times
7.1 Edit Start Times
In this menu you manage the start times of the racers. It is possible to correct a start time,
delete it, copy it to another bib or assign a start time to a group of bibs.
The function key labelling must show the following "Start Finish RT
is displayed, you must press the key
7.1.1 Overwrite Start Times
If a start time needs to be corrected with a time that is not in the system (e.g. time from man-
ual timing), proceed as follows:
• press key
(Start)
• input bit that you want correct und confirm with
• the time that is blinking at the first digit you can manually overwrite
• confirm changes with key
• press key
(End) to exit the menu
7.1.2 Select Start Time
If several start times are assigned to a start number, the first one is automatically used as the
valid start time. The other start times are invalid and marked with a question mark (?). If you
want to select a different start time, proceed as follows:
• press key
• input bib that should be copied and confirm with
• select with the arrow keys
lected time)
• confirm it with
• the previous start time is now marked with „c" for CLEAR
• the new valid start time is now marked with „i" for INPUT
• press key
(Ende) to exit the menu
Stopwatch
.
will deactivates the focus function.
and
and
until the correct text will appear.
the time (at the end of the line an arrow marks the se-
- 7 -

". If another text is
, it shows the last

". If a different text
or (Single)
or (Single)