Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ALGE-Timing Timy 2
Summary of Contents for ALGE-Timing Timy 2
- Page 1 Version-E241009 Timy 2 & Timy3 Stopwatch...
- Page 2 Important Information General Before using your ALGE-TIMING device read the complete manual carefully. It is part of the device and contains important information about installation, safety and its intended use. This manual cannot cover all conceivable applications. For further information or in case of problems that are mentioned not at all or not sufficiently detailed, please contact your ALGE-TIMING representative.
- Page 3 Adjustments for the WTN-Communication ................13 Example ............................ 14 11.1 Race with Individual Start ......................14 11.2 Race with Mass- or Group Start ....................14 Copyright by ALGE-TIMING GmbH Subject to changes and misprints ALGE-TIMING GmbH Rotkreuzstraße 39 A-6890 Lustenau Tel: +43-5577-859 66...
- Page 4 Timy3 - Stopwatch Program Stopwatch The Stopwatch program is a timing program where you can run races with individual starts, group starts or mass starts. It is also possible to measure the times of several runs (e.g. al- pine skiing, luge). The Timy1 supports only individual starts! Keyboard and Commissioning Please check the manual “Timy GENERAL”...
- Page 5 Stopwatch Start Display (1) Bib from 1 to 9999 can be entered in this field (1). If a new bib is entered, it must be confirmed using the button (green “OK” button). The start automatic is also displayed (counting up, down or manual).
- Page 6 Timy3 - Stopwatch Memo (Timing Memory) (1) ..start information – start display (2) ..bib of memo-time that is marked (3) ..memo time (momory 1) (4) ..Marker for memo time (5) ..memo time (momory 2) (6) ..memo time (momory 3) F0 ..
- Page 7 Stopwatch Focus (Timing List) The “Timing list” sector in the display allows to view chronologically all times of competitors who are started. The times are displayed chronologically in the starting order. If you use the “Focus” function, the last running time is displayed in the first line of the timing list. ...
- Page 8 Timy3 - Stopwatch 7.1.3 Copy Start Time to Another Bib It is possible to copy a start time from an assigned bib to another bib. • press key (Start) • input bib of start time that you want to copy and confirm with (Single) •...
- Page 9 Stopwatch 7.2.2 Select Finish Time If several finish times are assigned to a bib, the first one is automatically used as the valid finish time. The other finish times are invalid and marked with a question mark (?). If you want to select a different finish time, proceed as follows: •...
- Page 10 Timy3 - Stopwatch 7.3.2 Select Run Time If several run times are assigned to a bib, the first one is automatically used as the valid run time. The other run times are invalid and marked with a question mark (?). If you want to se- lect a different run time, proceed as follows: •...
- Page 11 Stopwatch SC – Activate Safety Car This function only used for motorsport. The command for “safety car warning” is shown on the display board. The function key labelling must display the following “RT/tt SS SC ”. If a different text is displayed, you must press the key until the correct text appears.
- Page 12 Timy3 - Stopwatch Special Functions of Stopwatch There are some menu items that can only be activated for the Stopwatch program. 10.1 New Memo Time In the „Memo” menu you can set whether the cursor stays at the same time when a new memo time arrives or jumps to the last arriving time.
- Page 13 Stopwatch 10.3 Connect Several Timy3 to Each Other via WTN. This mode allows several Timy3 to be connected via radio (WTN). This makes it possible, to use e.g. a Timy3 to operate the start and one to operate the finish. In addition, a third Timy3 could be used for the intermediate time.
- Page 14 Timy3 - Stopwatch Example Below are some examples of how timing can be executed. 11.1 Race with Individual Start • Switch Timy3 on with key • Wait until <Realy switch on?> is shown in the display and then press • Wait until the program list is shown and select with the key the program <STOP- WATCH>...
- Page 15 Press key • The racer can pass the finish. The bib you input after passing. • Exit the menu <Memo> by pressing key Copyright by ALGE-TIMING Subject to changes and misprints ALGE-TIMING GmbH Rotkreuzstraße 39 A-6890 Lustenau Tel: +43-5577-859 66 Fax: +43-5577-859 664 office@alge-timing.com...
Need help?
Do you have a question about the Timy 2 and is the answer not in the manual?
Questions and answers