ALGE-Timing Timy 2 Manual page 8

7.1.3 Copy Start Time to Another Bib
It is possible to copy a start time from an assigned bib to another bib.
• press key
(Start)
• input bib of start time that you want to copy and confirm with
• press key
(Copy)
• input bib of racer that should get the start time and confrim with
• press key
(End) to exit the menu
Attention: If necessary, delete the start time of the runner from which the copy was made!
7.1.4 Input Group Start
You can copy the start time of one racer to a group of racers. The group must continues bibs
(e.g. bib 21 to 49). It have a fixed start time you can manually enter this start time before the
start.
• press key
(Start)
• input bib of fist racer of the group and press
• input bib of last racer of the group and confirm with key
• input the time or if the first racer of the group has already a time keep this time
• press key
to confirm and exit the menu
• all racer of the group are now started and the menu "input group start" is exit
Attention
:
If individual runners in the group already have a start time when entering start times for a group,
these will be overwritten. Group start times can only be entered if no competitor in this group
has a run time yet. If a racer in the group has already run time, the start times for the group will
not be accepted and the display will briefly show the following message: "NOT ALLOWED –
FINISH TIME".
7.2 Edit Finish Times
In this menu you can manage the finish times of the competitors. It is possible to correct, de-
lete or copy the finish time of a racer to another racer. The function key labelling must show
the following: "Start Target RT
until the correct text appears.
7.2.1 Overwrite Finish Times
If a finish time needs to be corrected with a time that is not in the system (e.g. time from
manual timing), proceed as follows:
• press key
(FINISH)
• input the bib that you want to copy and confirm with
• the first digit of the time field blinks and the new time can be input
• confirm with key
• press key
(End) to exit the menu
Timy3 - Stopwatch

". If a different text is displayed, you must press the key
- 8 -
or
or
or
or (Input)
(Single)
(Single)