Bowflex VeloCore 22 Troubleshooting Manual

3/7/24, 11:47 AM
VeloCore 22: Why isn't the resistance shown on the console?
Follow this troubleshooting guide to help resolve resistance issues on the VeloCore 22 bike. If you need assistance adjusting the
resistance level, please visit VeloCore 16 and 22: How do I adjust the
Some common complaints may include:
Resistance is not registering on console
Resistance level doesn't show up
Console doesn't display resistance
Follow these steps to troubleshoot the issue
Check for updates on your machine. Verify you have a good Wi-Fi connection. Unplug your machine and plug it back
1.
in. When the BowFlex or JRNY page displaying serial numbers in the 4 corners appears, tap the upper right corner 10
times within 3 seconds (reference 1.1). If you are unable to reach this screen, log out and tap the upper right corner
10 times within 3 seconds from the Log In screen (reference 1.2).
The initial screen showing the BowFlex or JRNY logo appears with serial numbers in each corner. Tap the upper right corner 10 times within
about:blank
VeloCore 22:  Why isn't the resistance shown on the console?
(Reference 1.1)
3 seconds to access the menu to force an update.
(Reference 1.2)
resistance? for assistance.
ID: 11869.1
1/7