3/11/24, 8:50 AM
BowFlex IC Bike & Max Trainer SE: Metrics are not displayed on the
console
Common issue descriptions:
No workout metrics displayed
Workout metrics are missing from console
Heart rate, speed, resistance, watts, or other workout data is not visible
Console only shows "App Connected"
Tools used in this guide:
Estimated time to complete:
Let's get started!
We will check each of the components below to determine which is causing the issue.
1.
Display Metrics setting
Change the Display Metrics setting
Tools Required:
None
To fix this issue, we will need to re-enable the metrics in the settings of your machine's console.
1.
Power up the Console and make sure it is on the home screen - "PRESS START" will be
displayed.
2.
Press and hold the Enter/Start button for 3 seconds to enter the Console Setup Mode. SYS
UNITS IMPERIAL will be displayed.
3.
Press the Enter/Start button five times until DISPLAY METRICS NO is displayed:
a.
Press the Increase/Decrease button to change the option to DISPLAY METRICS
YES.
b.
Press the Pause/Stop button to save and exit the System Menu.
c.
The Console will display "SETTINGS SAVED" and then exit to the home screen.
d.
The new settings will take effect the next time your bike is power cycled (turned
off/back on)
4.
Power cycle your bike to enable the new settings [16007.A]:
a.
Unplug the power cord from your machine.
b.
Wait 30 seconds (this step is important, as it allows the machine to power down
completely).
c.
Plug the power cord back into your machine.
about:blank
BowFlex IC Bike & Max Trainer SE: Metrics are not displayed on the console
None
Less than 5 minutes
Estimated Time to Complete:
Less than 5 minutes
ID: 16007.1
Reference 1
Step 1
Step 2
Step 3
Reference 2
1/2
Need help?
Do you have a question about the IC Bike and is the answer not in the manual?
Questions and answers