Bowflex IC Bike SE Quick Start Manual

3/11/24, 4:52 PM
BowFlex IC Bike SE: Speed/RPM Reading issues
Common issue descriptions:
Speed or RPM is not displayed
No speed or RPM readings
Speed/RPM metrics not displayed correctly
Inaccurate speed or RPM shown
Speed displayed is always '0'
Tools used in this guide:
13mm, 15mm, and 19mm open-ended wrenches, 25mm crank puller
Estimated time to complete:
Let's get started!
We will check each of the components below (in order) to determine which is causing the issue.
1.
Cable connections
Connection behind the console
Connection at the Base Hub
2.
Speed sensor assembly
Before we dive in, is the speed/RPM reading missing or not displayed correctly in the JRNY
app?
When your IC Bike SE is paired to JRNY, all data it sends to the JRNY app should also be displayed on the
console screen. If the data is incorrect or missing from your JRNY Journal, please visit
Troubleshooting or www.JRNY.com/customer-service
Inspect the cable connection behind the console
Tools Required:
None
Important: Unplug the power cord from both the front of your machine and the electrical outlet
before continuing.
1.
There is one cable connection at the back of the console.
the cable during troubleshooting.
2.
Unplug the cable and check the following items before reconnecting:
Damage - the cable and connector should be intact and undamaged. If the cable
sheath is partially or fully cut, has a loose connector, or has missing/bent pins within a
connector,
Connector Orientation - the console cable has a special tab on the connector to
ensure it can only be installed in one direction.
Connection Tightness - the cable connectors must be firmly pressed together to
properly secure the connection.
3.
Once the cable is reconnected, test if the issue persists [15650.B].
4.
If the issue persists, check the next connection in the section below.
about:blank
Phillips head and flathead screwdrivers, 16mm and 19mm socket and wrenches, 10mm,
Approximately 45 to 50 minutes.
Estimated Time to Complete:
Less than 5 minutes
order a Handlebar Post with Cable
BowFlex IC Bike SE: Speed/RPM Reading issues
for assistance.
Service Manual Procedure:
Replace the Handlebar Post
Be careful not to pinch or crimp
[15650.A].
ID: 15650.3
JRNY Basic App
Step 1
Step 2
1/6