Chapter 3 Connecting Cables; Connecting Two Pcs To The Monitor - Eizo FLEXSCAN S2000 User Manual

Chapter 3 Connecting Cables

3-1 Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I and the D-sub
mini 15-pin connectors on the back of the monitor.
Connection examples
DVI-I connector
PC 1
DVI Signal cable
(supplied FD-C39)
D-sub mini Signal cable
15-pin (FD-C16 option)
Selecting input signal
Input signal selection button
SIGNAL
AUTO ENTER
1 - 2
Switch the input signal with
pressed. When the signal is switched, the active signal type (Signal 1 or 2/
Analog or Digital) appears at the top right corner of the screen for two seconds.
24
Chapter 3 Connecting Cables
D-sub mini
15-pin connector
(SIGNAL1) (SIGNAL2)
Signal cable
(supplied MD-C87)
Signal cable
(supplied MD-C87)
. Input signal switches each time
PC 2
D-sub mini
15-pin
D-sub mini
15-pin
is
Attention
• When using an optional signal cable
(FD-C16), be sure to connect the
D-sub mini 15-pin connector to the
PC, and the DVI-I connector to the
monitor. If connected wrongly, no
picture is displayed.