To Set Priority Of Pc To Be Displayed [Input Priority] - Eizo FLEXSCAN S2000 User Manual

●

To set priority of PC to be displayed [Input Priority]

When two PCs are connected, either one can be displayed preferentially. The
monitor senses the input signal regularly. When the signal that is given priority
with the <Input Priority> setting is input, signal input switches automatically to
the prior signal.
Priority setting
1
Signal 1, input from DVI-I connector
2
Signal 2, input from D-sub mini 15-pin
connector
Manual
[Input priority setting]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Input Priority> from the <Others> menu, and press
The <Input Priority> menu appears.
(3) Select "1" or "2" or "Manual" with
The Input Priority setting is completed.
Function
The priority input setting functions in
the following cases.
• When the monitor is turned on
• When the Signal 1 status changes
even when Signal 2 is displayed
The priority input setting functions in
the following cases.
• When the monitor is turned on
• When the Signal 2 status changes
even when Signal 1 is displayed
The monitor does not detect the PC's
signals automatically. Select an active
input signal with .
.
or , and press
NOTE
• Power-saving function
When "1" or "2" is selected for
<Input Priority>, the monitor's
power-saving function works only
when the two PCs are in the power-
saving mode.
• When only one PC is connected, the
input signal is detected automatically
regardless of whether the input signal
1 or 2 has priority.
.
.
Chapter 3 Connecting Cables
25