Table of Contents
Advertisement
Signal Cable
(FD-C39 enclosed)
The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector).
2. Plug the power cord into the power connector on the rear of the monitor.
3. Lead the power cord and signal cable into the cable holder at rear of the monitor.
When housing the cables into the cable holder, lead them to the cable entrance side and pinch the
projection to open the cable entrance.
The cables are recommended to lead with slight sag for the smooth motion of the stand and the
Portrait/Landscape display.
4. Plug the other end of the power cord into a power outlet.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord. Not doing so may
result in fire or electric shock.
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
Digital Graphics board
Power Mac G4/G5 (DVI)
Advertisement
Table of Contents
