Table of Contents
Advertisement
To set the brightness and contrast of the screen
Brightness
Contrast Adjustment will be available only when FineContrast mode is
"Custom","Text","Picture" or "Movie".
To set the color temperature
Temperature
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature
setting. (The color temperature's setting turns "OFF".)
To set the gamma value
Gamma
If setting the gamma value, the using the monitor in the digital signal input is recommended.
If using the monitor in the analog input signal, set the gamma value from 1.8 to 2.2.
To change the saturation
Saturation
The <Saturation> adjustment may cause undisplayable color tone.
To change the flesh color, etc.
Hue
Using <Hue> adjustment may not obtain proper tone reproduction.
To change each color
(red, green and blue)
Gain
The values shown in the percentage are available only as a reference tool.
Setting the <Temperature> invalidates the <Gain> adjustment. <Gain> setting returns to the
defaul.
6 colors
To adjust <Saturation> and <Hue> in each color
(Red, Yellow, Green, Cyan, Blue and Magenta)
Reset
To return the color settings of the selected mode
to the default settings
4-4. Power-save Setup
0 ~ 100 %
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K).
Default setting is off (normal white)
1.4 ~ 3.0
-100 ~ 100
Setting the minimum level (-100) turns the
image to the monochrome.
-100 ~ 100
0 ~ 100%
By adjusting the red, green and blue color tones
for each mode, custom colors can be defined.
Display a white or gray background image and
adjust the <Gain>.
Hue: -100 ~ 100
Saturation: -100 ~ 100
Select the <Reset>.
Advertisement
Table of Contents
