Blueant PUMP AIR LITE Manual

Charging the case

The charging case features a dual-color LED that indicates the charging status and battery level.
While charging, the LED will turn solid white and periodically flash red to indicate the charging progress:

• flash: 25% charged
• flashes: 50% charged
• flashes: 75% charged
• flashes: 76-100% charged

Once the LED turns solid red, the case is fully charged and can be unplugged.

Checking Case Battery Level When Not Charging
To check the battery level when the case is not charging, remove both earbuds and place them back into the case. The LED will periodically flash red to indicate the current charge level, with the number of flashes as described above.

Charging the Earbuds
Each earbud has an LED that will light up solid white during charging. The LED will turn off once the earbuds are fully charged. Please note that the left and right earbuds may charge at different rates.

Let's Get Started | Pairing to your phone

1. Remove both earbuds from the charging case and place them in your ears.
2. When the earbuds are turned on for the first time, they will automatically enter Bluetooth pairing mode.
3. After a few seconds, you will hear the words "Bluetooth pairing."
4. On your phone, search for the Bluetooth device named 'BlueAnt Pump Air Lite' and select it to pair. You should hear, "Connected."
5. The earbuds will automatically reconnect to your phone whenever you remove them from the charging case. They will disconnect and power off when placed back in the case.

Pairing with a New Device

• If you need to pair the earbuds with another phone, first turn off Bluetooth on the currently connected phone.
• The earbuds will announce,"Disconnected," followed shortly after by "Bluetooth pairing."
• On the new phone, select'BlueAnt Pump Air Lite' to complete the pairing.
  N.B. If your earbuds are showing up as two separate devices, it means they have become disconnected from each other. Please follow the instructions to re-sync them together.

Let's Get Started | Fit

To ensure the best sound, you need the best fit. Having the best fit creates a seal and enhances the bass performance.
The diagram on the right, is how the earbuds should sit in your ear. There are 3 sizes of ComfortSealTips - Small, Medium and Large.
To get the most out of the earbuds, it's best to try out each of the sizes to get the best fit.

Button Functions

Power

1. When you remove the earbuds from the charging case, they will automaticallypower on and try to reconnect to the last phone they were connected to.
   
2. When you place the earbuds into the charging case, they will automaticallypower off.
3. Topower on without the charging case, press and hold the MFB for 2s.
   To power off without the charging case, press and hold the MFB on either earbud for 6s.
   
4. To pair without the charging case from off,press and hold the MFB on one earbud for 5s, and then pair with your phone. Then press and hold MFB on the other earbud for 2s to power it on.

• The earbuds announces when the battery is low, when there is about 30 mins of play time left.
• The earbuds features an iPhone battery meter.
• Mono Operation: It is possible to use the earbuds as a mono headset. Simply remove one of the earbuds from the charging case.
  

How to Re-Sync Your Pump Air Lite Earbuds

If your earbuds become disconnected from each other and show up as two separate devices on your phone, or if you are replacing a lost earbud, follow these steps to re-sync them:

1. Remove any existing pairing of the earbuds from your phone.
   • You should not have any'BlueAnt Pump Air Lite' showing up under paired devices on your phone.
   • Ignore anything showing up as an available device at this point.
2. 
   Ensure your charging case is fully charged as indicated by the battery LED flashing 4 times.
3. Take the right earbud out of the charging case and wait for the LED to start flashing white/blue (this can take approx. 10s).
   • Once the LED is continuously flashingwhite/blue, tap the BlueAnt symbol 5 times quickly, but on the 5th time, press and hold until the LED flashes white quickly.
   • A few seconds later, the LED will turn off and the earbud will power down. Place theright earbud on the bench.
4. Now, take the left earbud out of the case and repeat the above (5-tap) process until the LED turns off.
5. Place both earbuds back into the charging case.
   • When the LEDs on both earbuds turnsolid white, remove them from the case.
   • Holdboth earbuds in one hand using your thumb and index finger. You should see both LEDs flashing blue.
6. Using the index and middle fingers from your other hand, tap the BlueAnt logo on both earbuds 3 times simultaneously.
   • This will initiate the re-syncing process, which can take up to 10s.
7. Once the earbuds re-sync with each other, one earbud will stop flashing (LED off) and the other will start flashing white/blue.
8. Scan for Bluetooth devices on your phone. You should now see a single 'BlueAnt Pump Air Lite' which you can connect to.

Troubleshooting

• If the LED continues to flash blue when you took the earbud out of the case in step 3 or 4, it means it's already in 're-sync' mode. Place it on the bench and check the other earbud. If both earbuds are continuously flashing blue, skip to Step 6, otherwise repeat the 5-tap process until both buds flash blue when you take them out of the case, then perform Step 6.

Support

For help and support, visit: support.blueantwireless.com
Register your Pump Air Lite for updates: register.blueantwireless.com
By using this product, you agree to the terms and conditions listed on the BlueAnt website: www.blueantwireless.com

Sweatproof
The Pump Air Lite earbuds are sweatproof, while the charging case is not. Please take care to avoid moisture and liquids, entering the charging case.

Important Safety Information

Using Ear Gels

Your BlueAnt earbuds will come with eargels or foam tips that are designed to provide a secure fit in your ear, while providing high quality audio

• Ear gels and tips are designed to sit comfortably in your ear and should not be forced into your ear at any time. If you have trouble fitting the ear gel or foam, please refer to the owner's manual for correct insertion and usage information.
  Always make sure that the ear gel or foam is fitted securely to your device, before placing it in your ear.

Care and Handling
Your BlueAnt Bluetooth device is a precision engineered instrument. To ensure its ongoing performance, you should look after it as you would any quality consumer electronic product, and use it in accordance with the instructions.
BlueAnt recommends that you take the following precautions.

• Avoid leaving your device in direct sunlight, such as on the dashboard or console of a car or truck. Do not leave your device unattended in your vehicle.
• Do not leave your device, or use your device, in any area where the temperature may exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car on a hot day. Remember that on a hot day, the temperature inside a closed car may be significantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area exposed to humidity, dust, soot, other foreign objects, smoke, or steam as this may cause your device to malfunction.
• Do not use any household or industrial grade detergents or cleaners to clean your device. If your device becomes dirty or smeared, in most instances, a wipe with a dry or slightly damp cloth should be sufficient to clean it.
• Do not leave your Bluetooth device, plugged into a wall or car charger for long periods after it is fully charged. BlueAnt does not recommend long periods of continued charging.
• Before charging your BlueAnt device, make sure that the AC outlet, adaptor and cable are not damaged. If you notice any abnormalities, seek advice from a qualified professional.
• If travelling internationally, ensure that your BlueAnt wall or car power adapter is approved for use in the country where you plan to use it and that the adapter voltage is suited to the local power supply.
• Should a fault develop with your BlueAnt product, contact BlueAnt for advice on how to proceed. Do not attempt to repair or alter any BlueAnt product yourself.

Approved Accessories
The use of accessories not approved by BlueAnt, including but not limited to batteries, antennas, wall adapters, car chargers, ear gels, foam tips and convertible covers, may cause your BlueAnt device to malfunction, or in the case of non-approved electrical accessories, may cause the device to exceed RF energy exposure guidelines. Use only 5V/1A chargers.
Use of non approved accessories will void your device's warranty. For a list of approved BlueAnt accessories, visit our website www.blueantwireless.com

Electromagnetic Interference
Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise for electromagnetic compatibility.
Similiar to a mobile phone, your BlueAnt device is a low power transmitter/ receiver and is covered by regulations in any facility where posted notices instruct you to do so. These facilities may include hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.

• When instructed to do so, turn off your BlueAnt device when you board an aircraft. Any use of a mobile device must be in accordance with applicable laws, regulations and airline crew instructions.
• Some Bluetooth devices may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.
• If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your doctor or physician may be able to assist you in obtaining this information.
• If you are in doubt whether your BueAnt device or mobile phone can be safely turned on or used, please consult an authorised person in the location you want to use your BlueAnt device. If no authorised person is available, or you remain uncertain, BlueAnt recommends that you turn off your Bluetooth device and any mobile phones unless they are required in an emergency situation.