BlueAnt Pump Air X2 Manual

Inside the box

Please read through this manual to get the most out of your earbuds.

Get to know your Pump Air X2

Charging your Pump Air X2

1. Open the charging case
   
2. Place earbuds in case
   
3. Close the lid
   

Use the supplied charging cable. Please use only 5V/1A chargers.

The Pump Air X2 takes 2 hours for a full charge. You can also wirelessly charge the charging case by placing it on a compatible Qi charging pad. 5-10W charging is supported.

The Pump Air X2 charging case, takes 2 hours for a full charge. The charging case should charge the earbuds 10 times.

• The charging case has 4 lights. These signify the charge level of the case.
  1 light 25%, 2 lights 50%, 3 lights 75%, 4 lights 100% Once fully charged, please unplug the charging case.
  
• The charging case battery level indicator light turns on, when you remove or replace the earbuds in the charging case, to let you know the charge level of the charging case.
• The earbuds have a light that lights up when charging. The earbuds turn off when fully charged. The earbuds may charge at different rates for left and right sides.

Let's Get Started

Pairing

In order to get started using the Pump Air X2, we need to pair it to your phone.

1. Please remove both earbuds from the charging case, and put them in your ears.
2. After a few seconds, they will play a sound in each ear, to let you know that both are connected.
3. When the earbuds turn on for the first time, it will go into pairing mode.
4. Now search your phone for 'BlueAnt Pump Air X2' and pair.
5. The earbuds will auto-reconnect to your phone whenever you take it out of the charging case, and power off when you put it back in.

If you need to pair with another phone, please turn off Bluetooth on the connected phone. The ear buds will say "No phone connected" followed by "Pair me."
Now select the "BlueAnt Pump Air X2" on the new phone to connect.

Fit

To ensure the best sound, you need the best fit. Having the best fit creates a seal and enhances the bass performance.

This diagram is how the earbuds should sit in your ear.

We have included 4 sizes of ComfortSeal tips (x-small, small, medium, large), and 3 sizes of ComfortSeal Plus tips, so you get an even more snug fit and to ensure the earbuds never fall out. It's best to try out each of the sizes to get the best fit.

Button Functions

Listen

Click once to Play/Pause

Double click the Right earbud to Skip Forward

Double click Left earbud to Skip Back

Siri/Google

Click MFB three times to Activate/Cancel Siri/Google

Talk

Click once to Answer Call

Click once to End Call

Press and hold to Reject Call

Volume

When music is playing or on a call

Press and hold the MFB on the Right earbud to increase volume

Press and hold the MFB on the Left earbud to decrease volume

Power

1. When you remove the earbuds from the charging case, they will automatically power on and try to reconnect to the last phone they were connected to.
   
2. When you place the earbuds into the charging case, they will automatically power off.
   
3. To power on without the charging case, press and hold the MFB for 2 seconds.
   
   To power off without the charging case, press and hold each MFB earbud for 6 seconds.
4. To pair without the charging case from off, press and hold the MFB on one earbud for 5 seconds, and then pair with your phone. Then press and hold MFB on the other earbud for 2 seconds to power it on.

• The earbuds announces when the battery is low, when there is about 30 mins of play time left.
• The earbuds features an iPhone battery meter.
• Mono Operation: It is possible to use the earbuds as a mono headset. Simply remove one of the earbuds from the charging case.

Support

For help and support, visit: support.blueantwireless.com
or email: care@blueantwireless.com

Register your Pump Air X2 for updates: register.blueantwireless.com

By using this product, you agree to the terms and conditions listed on the BlueAnt website: www.blueantwireless.com

Waterproof

The Pump Air X2 microbuds are IP 67 Waterproof, while the charging case is not. Please take care to avoid moisture and liquids, entering the charging case.

Important Safety Information

PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY, BECAUSE IT CONTAINS IMPORTANT INFORMATION ABOUT THE SAFE USE OF BLUEANT DEVICES

ONLY CHARGE WHEN DEVICE IS CLEAN AND DRY

PROTECT YOUR HEARING
BLUEANT DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS.
PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING CAPACITY AND MAY RESULT IN NOISE INDUCED HEARING LOSS (NIHL). TURN OFF THE POWER TO YOUR DEVICE WHEN NOT IN USE.

Please ensure that the device and any associated components such as ear gels or chargers, are stored safely and that any packaging or unwanted contents are disposed of thoughtfully. Do not place the product on the floor or leave it in a place, where young children could access it, or someone could trip over it.

Using Ear Gels

Your BlueAnt earbuds will come with eargels or foam tips that are designed to provide a secure fit in your ear, while providing high quality audio

• Ear gels and tips are designed to sit comfortably in your ear and should not be forced into your ear at any time. If you have trouble fitting the ear gel or foam, please refer to the owner's manual for correct insertion and usage information.

Always make sure that the ear gel or foam is fitted securely to your device, before placing it in your ear.

NOTE THAT NON COMPLIANCE, MISUSE OR FORCING THE EAR GEL OR FOAM MAY CAUSE DAMAGE TO YOUR EAR CANAL EARDRUM, OR MAY OTHERWISE CAUSE BODILY HARM

Care and Handling

Your BlueAnt Bluetooth device is a precision engineered instrument. To ensure its ongoing performance, you should look after it as you would any quality consumer electronic product, and use it in accordance with the instructions.

BlueAnt recommends that you take the following precautions.

• Avoid leaving your device in direct sunlight, such as on the dashboard or console of a car or truck. Do not leave your device unattended in your vehicle.
• Do not leave your device, or use your device, in any area where the temperature may exceed 60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car on a hot day. Remember that on a hot day, the temperature inside a closed car may be significantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area exposed to humidity, dust, soot, other foreign objects, smoke, or steam as this may cause your device to malfunction.
• Do not use any household or industrial grade detergents or cleaners to clean your device. If your device becomes dirty or smeared, in most instances, a wipe with a dry or slightly damp cloth should be sufficient to clean it.
• Do not leave your Bluetooth device, plugged into a wall or car charger for long periods after it is fully charged. BlueAnt does not recommend long periods of continued charging.
• Before charging your BlueAnt device, make sure that the AC outlet, adaptor and cable are not damaged. If you notice any abnormalities, seek advice from a qualified professional.
• If traveling internationally, ensure that your BlueAnt wall or car power adapter is approved for use in the country where you plan to use it and that the adapter voltage is suited to the local power supply.
• Should a fault develop with your BlueAnt product, contact BlueAnt for advice on how to proceed. Do not attempt to repair or alter any BlueAnt product yourself.

Approved Accessories

The use of accessories not approved by BlueAnt, including but not limited to batteries, antennas, wall adapters, car chargers, ear gels, foam tips and convertible covers, may cause your BlueAnt device to malfunction, or in the case of non-approved electrical accessories, may cause the device to exceed RF energy exposure guidelines.
Use only 5V/1A chargers.
Use of non approved accessories will void your device's warranty. For a list of approved BlueAnt accessories, visit our website www.blueantwireless.com

Documents / Resources

References

• Support Center – BlueAnt
• Product Registration – BlueAnt
• BlueAnt – BlueAnt

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BlueAnt Pump Air X2 Manual