Setting Tv Channels - Sharp LL-M15X1 Operation Manual

The following table shows the channels this
monitor can receive.
VHF Channels 2 through 13
UHF Channels 14 through 69
Channel 1 (HRC and IRC mode only)
Cable
Channels 2 through 125 (STD, HRC and IRC)
(You must subscribe to a cable TV service to
receive cable channels.)
TV memory for channels is empty at shipment. To
receive channels, use the CHANNEL SETTING
menu.
Note:
- Release the adjustment lock (see page E33) if it
has been set. You cannot use the CHANNEL
SETTING menu while the adjustment lock is set.

Setting TV channels

Channel setting methods
There are two ways to set channels.
Automatically setting channels you can receive
(CHANNEL SEARCH)
The monitor will automatically set the channels it
can receive in your area.
Setting channels one at a time
(CHANNEL MEMORY)
This method is for manually setting the channels
you want one by one. Use this method if you want
to add other channels after using "CHANNEL
SEARCH".
E21