Watching Tv; Selecting The Channels - Sharp LL-M15X1 Operation Manual

Watching TV

TV memory for channels is empty at shipment.
The first time you use the monitor or when you
move to a new area, set the channels using the
CHANNEL SETTING menu. (See page E21.)
INPUT
MENU
BRIGHT
/
ENTER
MODE
CH
VOL/BRIGHT
MAIN
POWER
1. Select a channel using the CH buttons or
channel buttons on the remote control. (See the
right column.)
Pressing one of these buttons automatically
switches to TV mode if the monitor was in PC or
AV mode.
2. Adjust the volume.
See page E26 for more information.
Note:
- Use the INPUT button (monitor) or the TV button
(remote control) to switch the display mode to TV
when you are listening to TV in PC mode (see
page E28).
g02.P65
Watching TV
POWER
PC TV AV
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
39

Selecting the channels

This monitor allows you to select up to 125
channels (1 to 125). To select a channel using the
channel buttons on the remote control, enter a 2-
or 3-digit number.
POWER
PC TV AV
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
To select a 1- or 2-digit channel number (e.g.,
Channel 5):
Complete the following procedure within 4 seconds.
1. Press the 0 button.
2. Press the 5 button.
Note:
- When selecting a 1-digit channel number, do not
fail to press the 0 button first.
To select a 3-digit channel number (e.g., Channel
115):
Complete the following procedure within 4 seconds.
1. Press the 100 button.
2. Press the 1 button.
3. Press the 5 button.
Notes:
- The 3-digit channel number can be selected
only when the receiving mode is set to "CABLE"
in the CHANNEL SETTING menu. (See pages
E21 and E22.)
- You can also change the channel up/down one
at a time using the CH buttons.
E39
9/17/2003, 3:00 PM