Common Operations; Turning Power On/Off; Switching Display Modes (Input) - Sharp LL-M15X1 Operation Manual

Turning power on/off

INPUT
MENU
BRIGHT
/
ENTER
MODE
CH
VOL/BRIGHT
MAIN
POWER
Turning power on
When the power LED is off:
1. Press the MAIN POWER button on the monitor.
2. Turn on power for the connected equipment.
The power LED will light green, and then the
display mode will be displayed for several
seconds.
When the power LED is lit red (standby):
1. Press the POWER button on the remote control.
2. Turn on power for the connected equipment.
The power LED will light green, and then the
display mode will be displayed for several
seconds.
Turning off power
1. Turn off power for the connected equipment.
2. Press the POWER button on the remote control.
The power LED will light red (standby).
3. Press the MAIN POWER button on the monitor.
The power LED will go out.
Notes:
- Always wait at least 5 seconds between
switching power off/on. Rapid switching may
damage the monitor or cause it to malfunction.
- After switching power on, it may take a little
while before the screen displays an image.
- Do not turn off the power immediately after
changing various settings on the screen. The
changed values may not have been saved in the
memory yet.

Common operations

Switching display modes (INPUT)

POWER
AV
PC TV
SLEEP MENU
ENTER
BRIGHT
BRIGHT
MODE
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
[Monitor]
1. Press the INPUT button.
Each time you press the button, the input
changes in the following order:
PC → Number (TV) → AV → PC...
Display modes
PC
Number TV mode
AV
E25
INPUT
POWER
MENU
PC TV
BRIGHT
/
ENTER
MODE
SLEEP
CH
ENTER
BRIGHT
MODE
VOL/BRIGHT
DISPLAY CC
MAIN
POWER
P C
PC mode Displays the computer's
image.
Displays the TV's image.
The number will be the
channel being received.
AV mode Displays the image from
the equipment connected
to the AV input.
AV
MENU
BRIGHT
MTS MUTE
VOL
CH
FLASHBACK